Technical Notes, White paper and presentation on LTE, GSM, GPRS, EDGE and CDMA network, 3GPP specifications, UTRAN, GERAN and non 3GPP wireless concepts. This blog also covers programming concepts like C and C++, Embedded programming, SNMP Framework, NMS/EMS, Provisioning system, small cell concepts
Saturday, December 15, 2012
UMTS Handover event 2a, 2b, 2c, 2d, 2e, 2f explained
- Event 2a: Change of Best Frequency.
- Event 2b: The estimated quality of the currently used frequency is below a certain threshold and the estimated quality of a non-used frequency is above a certain threshold.
- Event 2c: The estimated quality of a non-used frequency is above a certain threshold.
- Event 2d: The estimated quality of the currently used frequency is below a certain threshold.
- Event 2e: The estimated quality of a non-used frequency is below a certain threshold.
- Event 2f: The estimated quality of the currently used frequency is above a certain threshold.
UMTS Call flow for Mobile to Mobile voice call
Wednesday, November 9, 2011
What is IUFlex in UMTS
In the 3GPP Release 5 IUFlex is introduced. It provides an ability to connect RNC's to more than one MSC and/or SGSN. Major benefit would be load sharing between MSC's or SGSN's.
Features supported in 3GPP release 99, release 5, release 6, release 7, Release 8
I often forget what features are added or enhanced in the various 3GPP releases. Here is the list of supported features in the each of the 3GPP release which covers most of part of it.
Release '99
· Bearer services
· 64 kbit/s circuit switch
· 384 kbit/s packet switched
· Location services
· Call services: compatible with Global System for Mobile Communications (GSM), based on Universal Subscriber Identity Module (USIM)
Release 4
· Edge radio
· Multimedia messaging
· MExE (Mobile Execution Environment)
· Improved location services
· IP Multimedia Services (IMS)
Release 5
· IP Multimedia Subsystem (IMS)
· IPv6, IP transport in UTRAN
· Improvements in GERAN, MExE, etc.
· HSDPA
Release 6
· WLAN integration
· Multimedia broadcast and multicast
· Improvements in IMS
· HSUPA
· Fractional DPCH
Release 7
· Enhanced L2
· 64 QAM , MIMO
· Voice over HSPA
· CPC - continuous packet connectivity
· FRLC - Flexible RLC
Release 8
· DC-HSPA
· HSUPA 16QAM
Thursday, October 27, 2011
T3312 Periodic Routing Area Update Timer
Periodic RA update timer or Periodic Routing Area Update Timer is T3312. T3312 is used to send RAU message periodically. Value of this timer is set based on the value received in the ATTACH ACCEPT and/or ROUTING AREA UPDATE ACCEPT message.
Normally, values are sent in the Decihours. 1 Decihours = 6 mins.
Normally, values are sent in the Decihours. 1 Decihours = 6 mins.
Friday, September 16, 2011
How to change or add the SMSC number to apple iPhone
How to get the SMSC set in the iPhone?
In the iPhone keypad and type *#5005*7672# Press Call
How to erase the SMSC set in the iPhone?
In the iPhone keypad, type ##5005*7672# Press Call
How to modify the SMSC set in the iPhone?
In the iPhone keypad, type **5005*7672*+<SMSC># Press Call
In the iPhone keypad and type *#5005*7672# Press Call
How to erase the SMSC set in the iPhone?
In the iPhone keypad, type ##5005*7672# Press Call
How to modify the SMSC set in the iPhone?
In the iPhone keypad, type **5005*7672*+<SMSC># Press Call
Subscribe to:
Posts (Atom)

